Handheld Nutrunner Micro Tools

Micro tools with a straight configuration are available, and can be easily installed on SCARA robots and tracer arms.

Lineup

Straight Tools

ESTIC's micro tools are uncondictive to static. The tool is designed with conductive resin that prevents ESD to the workpiece by diverting the energy. Three types of start triggers are available: lever start, the push start, I/O start.

Model Type Torque Range Max. Speed (rpm) Drive Shaft Weight Length
mN･m in-lb mm in kg lb mm in
EH2-RA1000-SNL DIRECT TOOLS 100-1000 0.89-8.85 1600 φ4.0 - 0.56 1.23 244 9.6
EH2-RA1000-SNP 100-1000 0.89-8.85 1600 φ4.0 - 0.58 1.28 252 9.9
EH2-RA1000-SRL 100-1000 0.89-8.85 1600 φ4.0 - 0.57 1.26 244 9.6
EH2-RA2000-SNL 200-2000 1.77-17.70 1000 Hex.6.35 1/4 0.57 1.26 244 9.6
EH2-RA2000-SNP 200-2000 1.77-17.70 1000 Hex.6.35 1/4 0.59 1.30 252 9.9
EH2-RA2000-SRL 200-2000 1.77-17.70 1000 Hex.6.35 1/4 0.58 1.28 244 9.6
EH2-RA5000-SNL 500-5000 4.43-44.26 334 Hex.6.35 1/4 0.60 1.32 255 10
EH2-RA5000-SNP 500-5000 4.43-44.26 334 Hex.6.35 1/4 0.63 1.39 263 10.4
EH2-RA5000-SRL 500-5000 4.43-44.26 334
(669 *1)		 Hex.6.35 1/4 0.62 1.37 255 10

* Only the "SP.HIGH SPD" setting applies. This product should be used at an ambient temperature of 30℃ (86℉) or less.

* Contact us for manuals

Login to Access

Related Products

Scara Robot
The ERS SCARA can be centrally managed by the nutrunner which controls the robot. This robot is easy to setup and program.
Tracer Arm
This assist arm eliminates the reaction force on the operator. The position detection system prevents mistakes such as skipped fasteners, wrong part tightening, and incorrect tightening procedures.
Corded Tools
Corded handheld nutrunners. We have various tools in our lineup, from 1 to 600 N･m ( 0.7 to 442.5 ft･lb ). A single controller can be used for a wide range of torques.
Cordless Tools
Cordless handheld nutrunner. High operator maneuverability without cables. Best for congested work areas.