Servo Press Servo Press
Three different tool lineups are available.
Lineup
SPT / SPH Model
SPT Model
This is a low friction standard model that uses a ball spline for the ram guide.
SPH Model
Continuously rated high thrust of a SPT100-30.
| Model *1 | SPT005-20 | SPT010-25 | SPT020-25 | SPT030-25 | SPT050-30 | SPT100-30 | SPH100-30 |
|---|---|---|---|---|---|---|---|
| Pressing Capability (kN) | 5 | 10 | 20 | 30 | 50 | 100 | |
| Consecutive Press Rate (kN) | 2.1 | 4.2 | 5.6 | 6.9 | 10.2 | 52.4 | 100 |
| Max. Stroke (mm) *2 | 200 | 250 | 300 | ||||
| Max. Feed Speed (mm/sec) | 345 | 310 | 225 | 200 | 121 | 114 | 44 |
| Max. Press-in Speed (mm/sec) | 80 | 76 | 60 | 46 | 27 | 85 | 33 |
| Repeatability (mm) | ±0.01 | ||||||
| Press Repeat Accuracy | 3σ/ X-bar = ± 1.5% | ||||||
| Length (mm) | 541 | 676 | 724 | 777.5 | 924 | 1175 | |
| Weight (kg) | 16 | 35 | 44 | 63 | 110 | 400 | |
| Applicable Control Unit | SPU50M-20 | SPU50M-40 | SPU50M-5K2 | ||||
| MPU60-40-* | MPU60-5K-* | ||||||
*1 SPT100-30 (High-Speed type) and SPH100-30 (Consecutive press type) are BTO.
*2 Please contact us for special strokes.
SPC Model
This compact model is compatible with narrow parts that adopt guide keys and bushes for ram guides.
| Model | SPC010-20-F | SPC020-20-F | SPC030-20-F | SPC050-20-F | SPC100-20-F |
|---|---|---|---|---|---|
| Press Max. Load(kN) | 10 | 20 | 30 | 50 | 100 |
| Press Continuous Rated Load (kN) | 4.1 | 7.5 | 10.4 | 25.1 | 42.5 |
| Max. Stroke (mm) *1 | 200 | ||||
| Max. Feeding Speed (mm/s) | 200 | 310 | 235 | 255 | 151 |
| Max. Pressing Speed (mm/s) | 120 | 220 | 155 | 170 | 100 |
| Break Sustain Load (N) | 196 | 294 | 490 | 980 | 1960 |
| Press Repeat Accuracy | 3σ/ X-bar = ± 1.5% | ||||
| Repeatability (mm) *2 | ±0.01 | ||||
| Length (mm) | 545 | 650 | 745 | 862 | 977 |
| Weight (kg) | 14 | 33 | 47 | 112 | 153 |
| Applicable Control Unit | SPU50M-40 | SPU50M-5K | SPU50M-5K2 | ||
| MPU60-40-* | MPU60-5K-* | ||||
*1 Please contact us for special strokes.
*2 Under the conditions of Estic testing standard
